Carbon Steel
Posted on Wednesday, April 15, 2009 in football gear and supplies
Carbon Steel
| Shop | ||||
|
1830 Napoleon Saber, Steel Scabbard Ea 88NS from $ 194.99 Features a 33.75 in. 1050 high carbon steel blade and a 5.25 in. black leather wrapped handle. Comes complete with a steel scabbard. Stock Status : In 4 Stores 
|
|||
|
Cold Steel Gladius Machete 97Gms from $ 25.99 Cold Steel Gladius Machete. 26 7/8" overall. 19" black finish 1055 carbon steel double edge sharpened blade. Black high impact polypropylene handle with standard guard and ball shaped pommel. Black Cordura® belt sheath. Bulk packed. Stock Status : In 5 Stores
|
|||
|
Torpedo, Cold Rolled 5150 Steel, Matte Finish (80TOR) from $ 10.02 Heavy and perfectly balanced, the Torpedo is a lot of fun for target throwing. The double tapered points slide effortlessly from the hand for a perfect release with twice the sticking potential of a conventional throwing knife. The Torpedo is made from cold rolled 5150 steel, zone heat treated for maximum resistance to breakage. Stock Status : In 9 Stores
|
|||
|
Scottish Dirk, Rosewood Handle, Leather Scabbard (88SD) Category Miscellaneous Knives from $ 94.99 Item #: 88SD. Features a 13.00 in. 1050 high carbon steel blade and a 5.36 in. rosewood handle. Comes complete with a leather scabbard. Customers also search for: Scottish Dirk Knives Cold Steel Cutlery Stock Status : In 4 Stores
|
|||
|
Cold Steel Perfect Balance Thrower, Composite Plastic Handle from $ 15.25 Our Perfect Balance Thrower takes inspiration from a 1950's classic. Its center of balance is at the midpoint of its overall length. It hits hard and penetrates its target efficiently because of its considerable weight and fully sharpened clip point. The strong 1055 carbon steel construction, black rust resistant finish, and replaceable composite handle scales, make it durable enough for thousands of throws. Plus, it has an additional benefit in that it can also hold its own as a heavy duty survival knife, cleaver or hatchet. Get yours today! Stock Status : In 3 Stores
|
|||
|
Camping: Cold Steel Bushman Survival Knife from $ 20.99 The Bushman could be the one tool you need to survive a bad situation. Use it is as a machete to clear brush and build structures or as a spear by taking off the end cap and inserting a makeshift handle. Unlike most hollow-handled survival knives, there is no joint between the blade and handle. Instead, the 7" blade and handle are cold forged out of a single piece of 2.5mm thick SK-5 high-carbon steel. Fill the accessory pocket with essential survival needs like matches and other small items. Includes a heavy-duty Cordura survival sheath. Overall length: 12.25". Weight: 9.8 oz. Stock Status : In 5 Stores
|
|||
|
Whetstone Cutlery Black Mamba Carbon Steel Katana
USD 26.99 Bring the deadly fast strike of the serpent to your armory with the Black Mamba by WhetstoneT Cutlery. The 25.75 inch black coated carbon steel blade is accented by a black polished sheath adorned with brass hardware. The Black Mamba will make a stunning addition to any collection, but handle with care!Product Features:Black Coated Carbon Steel BladeCord Wrapped HandleBrass HardwareBlack Polished Wood SheathBlade Length: 25.75 inchesOverall Dimensions: 41 x 3 x 3.5 inches 
Notes : up to 60% off Top Brands + Free Shipping Stock Status : in-stock
|
|||
|
TIME I-ClicAA Carbon Pedal
USD 249.95 You can make an insanely light pedal by combining a hollow steel axle, a full carbon fiber body, and a carbon spring, and that's what exactly what Time has done with the Time I-Clic 2 Carbon Pedals. The I-Clic system has been lauded since its introduction, and for good reason: it makes stepping into your pedals easier than any other system on the market.The retention mechanism on the I-Clic 2 Carbon Pedals employs a carbon leaf spring rather than a coiled metal spring. Basically, it's a flexed blade of carbon fiber. When you step into the pedal, the cleat presses a trigger that releases the energy trapped in the leaf spring, which snaps a clasp into place over the back of the cleat. Think of a standard mousetrap; it's pretty much the same concept. When you click out of the pedals, the retaining clasp returns to a cocked, open position for the next time you clip in.The I-Clic 2 Carbon Pedals allow sprung angular float of five degrees in either direction. The cleat can also move 2.5mm laterally when clasped in the pedal. These float characteristics offer some freedom of movement, but also a secure and controlled connection to the pedal for hard efforts and sprints. You can choose one of three spring tension settings to dial in the feel of the float.This is the second generation of the I-Clic design, and the engineers at Time made some key improvements. They added metal plates to the top side of the pedals for a more durable pedal-cleat interface. The retaining clasp was beefed up a bit, and the cleats were also made more robust to last longer. The cleats have rubberized contact points outside the pedal interface for walkability. They're also asymmetrical, so by choosing which cleat goes on each foot you can change the width of your pedal stance by 2.5mm.The Time I-Clic 2 Carbon Pedals have a hollow steel axle and carbon fiber body. They come in Black.
Notes : Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel
USD 159.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
TIME I-ClicAA Carbon Pedal Black, One Size
USD 249.95 You can make an insanely light pedal by combining a hollow steel axle, a full carbon fiber body, and a carbon spring, and that's what exactly what Time has done with the Time I-Clic 2 Carbon Pedals. The I-Clic system has been lauded since its introduction, and for good reason: it makes stepping into your pedals easier than any other system on the market.The retention mechanism on the I-Clic 2 Carbon Pedals employs a carbon leaf spring rather than a coiled metal spring. Basically, it's a flexed blade of carbon fiber. When you step into the pedal, the cleat presses a trigger that releases the energy trapped in the leaf spring, which snaps a clasp into place over the back of the cleat. Think of a standard mousetrap; it's pretty much the same concept. When you click out of the pedals, the retaining clasp returns to a cocked, open position for the next time you clip in.The I-Clic 2 Carbon Pedals allow sprung angular float of five degrees in either direction. The cleat can also move 2.5mm laterally when clasped in the pedal. These float characteristics offer some freedom of movement, but also a secure and controlled connection to the pedal for hard efforts and sprints. You can choose one of three spring tension settings to dial in the feel of the float.This is the second generation of the I-Clic design, and the engineers at Time made some key improvements. They added metal plates to the top side of the pedals for a more durable pedal-cleat interface. The retaining clasp was beefed up a bit, and the cleats were also made more robust to last longer. The cleats have rubberized contact points outside the pedal interface for walkability. They're also asymmetrical, so by choosing which cleat goes on each foot you can change the width of your pedal stance by 2.5mm.The Time I-Clic 2 Carbon Pedals have a hollow steel axle and carbon fiber body. They come in Black.
Notes : Stock Status : in-stock
|
|||
|
Time Iclic Carbon Pedals
USD 249.95 Optimized for performance and biomechanics, the TIME™ Iclic Carbon Pedals keep you steady and efficient throughout your races. Carbon body with hollow steel axle and flexible Carbon blade. Automatic pre-opening of engagement mechanism. Adjustable angular sensations. Q-Factor adjustment allows for the adjustment of lateral foot positioning. Oversized platform with stainless steel plates. BIOPOSITION™ Concept minimizes distance from sole to pedal axle. Angular float: +/- 5°. Lateral float: 2.5mm. Release angle: 15°. 225g per pair.
Notes : Usually Ships in 24 Hours Stock Status : in-stock
|
|||
|
Scratch Golf AR-1 Iron Set
USD 1099.95 Scratch Golf AR-1 Iron Set Scratch AR-1 Irons are forged from the same soft 1018 carbon steel as our wedges. The AR-1 irons are designed to offer maximum playability and forgiveness in a cavity back with the looks of a traditional muscle back blade at address. The center of gravity is in the center of the face and further back towards the trailing edge. The cavity design is progressive and has a lower COG in the long irons to help get the ball in the air. Scratch Golf AR-1 Iron Heads Scratch AR-1 irons are forged from 1018 carbon steel, the softest steel used by anyone making golf clubs today. The raw heads are then ground and finished completely by hand. The end result is the finest hand made forged traditional cavity back irons in golf, customized for your game. The headshape of the AR-1 irons was inspired by Scratch's work with Tour Pros from around the globe. Specific attention was paid to the transition from the middle irons to the short irons to assure perfect flow throughout the set from the 3 iron down to the PW. Scratch Golf AR-1 Iron Grooves The AR-1 irons feature our new 2010 "Condition of Competition" legal V grooves. These grooves are legal for play in any tournament in the world so you never have to worry about taking your favorite set of Scratch irons out of the bag because the groove rule has changed. These grooves are designed to have the maximum amount of groove surface while still adhering to the new USGA rules. This reduces flier lies and provides more consistent spin and performance. Scratch Golf AR-1 Iron Finish AR-1 irons feature Scratch?s Brushed Satin finish. This finish provides the durability of chrome with a duller surface to help eliminate glare. The minimal stampings of the AR-1 irons provide a very clean look unique to the Scratch Golf brand and allow for personal stampings to be added to customize the clubs for the player. Scratch Golf AR-1 Iron Heads Scratch Golf AR-1 irons feature the KBS Tour as our standard shaft. These shafts are designed by legendary shaft designer Kim Braley and are the culmination of his years of shaft design experience. These shafts have a slightly higher launch angle but a more boring ballflight overall. This makes them easier to swing and more forgiving while also giving them better ballflight into the wind. They feature a consistent taper design in a stepped shaft and are more workable and have better feel on partial shots
Notes : 30 Day Money Back Guarantee Stock Status : in-stock
|
|||
|
Look Keo 2 Max Carbon Pedals Bicycle Parts & Accessories
USD 219.99 LARGE AND RESISTANT CLEAT CONTACT AREA: For a more efficient and more comfortable pedal stroke, the K o 2 MAX has a cleat contact surface area 12% larger than the K o Carbon. To further improve the transfer of power and to longevity of the pedal, this surface area is made of stainless steel molded directly into the pedal body. LIGHT: At a mere 122 grams (in Carbon Version, 130g in Composite), the K o 2 MAX is one of the lightest pedals in its category. This has been achieved through the use of a carbon injection process allowing for weight reduction and improved durability. RELIABILITY:Particular attention was focused on reliability and provided through features such as: a carbon injected pedal body, a stainless steel cleat contact area, an oversized axle with dual seals, making this a pedal built to last. The new line of K o 2 MAX pedals maintains a low cleat contact height even with the use of a steel oversize axle. The pedal is built with two miniature ball bearings (12mm inner x 18mm outer diameters) and a needle roller bearing. LOOK axles are only approved once they have survived a million cycles at 100 revolutions per minute with a 90kg (198lbs) load at the center of the pedal and an eccentric rotation (replicating a bump each revolution). This test largely surpasses current standards. Dual seals increase bearing longevity. ADJUSTABLE Q-FACTOR:Thanks to 14mm of threads on the new LOOK axle, the Q-factor may be extended by 2mm with the use of specific washers available separately. Use of these specific washers results in a Q-factor of 55mm versus the original 53mm.
Notes : Free Shipping on Orders Over $49 Stock Status : in-stock
|
|||
|
Topolino Carbon Core WX2.5 pair
USD 975.00 Product BasicsThe Carbon Core WX2.5 from Topolino is the world's lightest wheelchair wheelset, weighing just 2.5 pounds. The WX2.5 is not only lightweight but also strong, durable and easier to push.Strength and DurabilityTopolino's wheels have a continuous Kevlar and carbon fiber spoke construction which reduces the spoke stress at the hub further reducing spoke breakage. The carbon fibers provide superior stiffness while the Kevlar adds tremendous toughness. The Kevlar/carbon fibers also significantly dampen road vibration more efficiently than standard steel spokes. Ease of UseThe light weight of the WX2.5 makes it easier to transport and store the wheel. The wheel also rolls easier and smoother and therefore is easier to push. The reduced effort means increased mobility with reduced fatigue and stress on arms and shoulders.ConstructionEach Topolino wheel is hand crafted and tuned and gauged to ensure perfectly balanced tension. The spoke nipples are made of an ultra-strong 7075 T6 aluminum that is cold forged and anodized while the rims are made of a heat treated 6061 T6 aluminum and have a proprietary double walled design. The hubs are a patented CarbonCore composite while the spokes are a Kevlar and carbon fiber hybrid. .
Notes : Free Shipping on all orders over $50! Stock Status : in-stock
|
|||
|
Scratch Golf SB-1 Iron Set
USD 1099.95 Scratch Golf SB-1 Iron Set Scratch Golf SB-1 Irons are forged from the same soft 1018 carbon steel as our wedges. The SB-1 irons are specifically designed to get the center of gravity in the center of the face for maximum playability and forgiveness in a muscleback design. SB-1 irons are in play on the PGA Tour and pretty much every major Tour worldwide. Scratch Golf SB-1 Iron Heads Scratch SB-1 irons are forged from 1018 carbon steel, the softest steel used by anyone making golf clubs today. The raw heads are then ground and finished completely by hand. The end result is the finest hand made forged muscleback blades in golf, customized for your game. The headshape of the SB-1 irons was inspired by Scratch's work with Tour Pros from around the globe. Specific attention was paid to the transition from the middle irons to the short irons to assure perfect flow throughout the set from the 3 iron down to the PW. Scratch SB-1 Iron Grooves The SB-1 irons feature our new 2010 "Condition of Competition" legal V grooves. These grooves are legal for play in any tournament in the world so you never have to worry about taking your favorite set of Scratch irons out of the bag because the groove rule has changed. These grooves are designed to have the maximum amount of groove surface while still adhering to the new USGA rules. This reduces flier lies and provides more consistent spin and performance. Scratch SB-1 Iron Finish Scratch SB-1 irons feature Scratch?s Brushed Satin finish. This finish provides the durability of chrome with a duller surface to help eliminate glare. The minimal stampings of the SB-1 irons provide a very clean look unique to the Scratch Golf brand and allow for personal stampings to be added to customize the clubs for the player. Scratch SB-1 Iron Shafts Scratch SB-1 irons feature the KBS Tour as our standard shaft. These shafts are designed by legendary shaft designer Kim Braley and are the culmination of his years of shaft design experience. These shafts have a slightly higher launch angle but a more boring ballflight overall. This makes them easier to swing and more forgiving while also giving them better ballflight into the wind. They feature a consistent taper design in a stepped shaft and are more workable and have better feel on partial shots .
Notes : 30 Day Money Back Guarantee Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 15" Length - .688 Bore - Dust Red
USD 159.95 IN STOCK & SHIPPING!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Scratch Golf EZ-1 Iron Set
USD 1099.95 Scratch Golf EZ-1 Iron Set Scratch Golf EZ-1 Irons are forged from the same soft 1018 carbon steel as our wedges. The EZ-1 irons are designed for absolute maximum forgiveness in a one piece forged head. The center of gravity is very low and far back towards the trailing edge. The blade is longer from heel to toe and the weight is pushed far out towards the edges of the club. This makes the EZ-1 irons as forgiving as any of the larger oversized irons on the market today. Despite their extreme forgiveness and playability the EZ-1 irons retain a traditional look at address with a thin topline and classic shape. Scratch Golf EZ-1 Iron Heads Scratch EZ-1 irons are forged from 1018 carbon steel, the softest steel used by anyone making golf clubs today. The raw heads are then ground and finished completely by hand. The end result is the finest hand made forged traditional cavity back irons in golf, customized for your game. The headshape of the EZ-1 irons was inspired by Scratch's work with Tour Pros from around the globe. Specific attention was paid to the transition from the middle irons to the short irons to assure perfect flow throughout the set from the 3 iron down to the PW. Scratch Golf EZ-1 Irons Grooves The EZ-1 irons feature our new 2010 "Condition of Competition" legal V grooves. These grooves are legal for play in any tournament in the world so you never have to worry about taking your favorite set of Scratch irons out of the bag because the groove rule has changed. These grooves are designed to have the maximum amount of groove surface while still adhering to the new USGA rules. This reduces flier lies and provides more consistent spin and performance. Scratch Golf EZ-1 Iron Finish EZ-1 irons feature Scratch?s Brushed Satin finish. This finish provides the durability of chrome with a duller surface to help eliminate glare. The minimal stampings of the EZ-1 irons provide a very clean look unique to the Scratch Golf brand and allow for personal stampings to be added to customize the clubs for the player. Scratch Golf EZ-1 Iron Shafts Scratch EZ-1 irons feature the KBS Tour as our standard shaft. These shafts are designed by legendary shaft designer Kim Braley and are the culmination of his years of shaft design experience. These shafts have a slightly higher launch angle but a more boring ballflight overall. This makes them easier to swing and more forgiving while also giving them better ballflight into the wind. They feature a consistent taper design in a stepped shaft and are more workable and have better feel on partial shots.
Notes : 30 Day Money Back Guarantee Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 17" Length - .688 Bore - Dust Red
USD 159.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 15" Length - .684 Bore - Dust Blue
USD 159.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 15" Length - .688 Bore - Dust Silver
USD 159.95 IN STOCK & SHIPPING!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Great Lakes Heavy Duty Carbon Steel Seismic Anchor Kit
USD 126.95 Great Lakes Heavy Duty Carbon Steel Seismic Anchor Kit
Notes : Backordered Stock Status : out-of-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 17" Length - .684 Bore - Dust Red
USD 159.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 17" Length - .692 Bore - Camo
USD 164.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 17" Length - .684 Bore - Dust White
USD 164.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
|
Dye Carbon Fiber 2 Piece Boomstick Barrel - Autococker Thread - 15" Length - .684 Bore - Dust Black
USD 159.95 In Stock & Shipping!!!Introducing the all new Dye Carbon Fiber Boomstick Barrel. Players have always desired a barrel with stainless steel precision, but strive to keep their equipment as lightweight as possible. The new Carbon Fiber Boomstick now gives players the best of both worlds. Featuring a unique and proprietary stainless steel insert with a carbon fiber outer sleeve, the Dye Carbon Fiber Boomstick barre brings barrel technology to a new level. The special blend of materials allows us to micro hone our barrels to a mirror finish while providing you with a lightweight barrel, lighter than our popular Dye Ultralite Boomstick. The stainless steel insert is built from gun drilled surgical grade 303 stainless steel and aircraft grade carbon fiber. The inside bore is honed to a 6 micron surface finish, giving you the smoothest and straightest barrel surface on the market. Carbon fiber provides a high strength-to-weight ratio, and the density of carbon fiber is considerably less than that of stainless steel, making it ideal for this barrel application resulting in an extremely light and accurate barrel. Combined with DYEs trademark muzzle break design, the all new Dye Carbon Fiber Boomstick barrel is quiet, aesthetically appealing and will once again set the standard of high performance in the barrel market. The all new Dye Carbon Fiber Boomstick Barrel undergoes a unique process of combining a stainless steel micro honed insert with that of the highly acclaimed carbon fiber material. This process allows us to provide you with the most accurate and lightweight barrel on the market today. Other barrels on the market use carbon fiber, but not in the way that we do. The surface the paintball travels on is actually micro honed surgical grade 303 stainless steel, wrapped in carbon fiber. This stainless steel surface is the most accurate of all materials available. It allows us to hone the surface so perfectly, it is comparable to 1/3 of a human hair. Unlike other carbon fiber barrels on the market where the paintball actually travels against the weave of the carbon fiber, ultimately leading to its degradation and decrease in accuracy over time, the Carbon Fiber Boomstick barrel provides you with longterm accuracy and consistency. With the all new Carbon Fiber Boomstick you will have stainless steel precision with extremely light weight performance. Truly, the Choice of Champions.
Notes : Stock Status : in-stock
|
|||
But what type of acid to carbon steel disolve disolves aliminum not?
I have aluminum wheels, carbon steel bolts and remove the need Nanraneun out the tab before using the product which some mountain Of course, but I can not find anymore procuct.
Concentration Steel, aluminum nitrate, but no effect on the degradation Does not. This is a very dangerous chemical, and Take the advice is another question. Do you want to have a more Must sell.
Forcing a "Patina" On Carbon Steel - Part 1
Fraser downplays carbon price effect
Queensland Treasurer Andrew Fraser has downplayed the effect a carbon price would have on investors who chose to buy QR National shares.The prospectus for the $7 billion float of Queensland's rail ...
Be the first to comment.